ICP DAS USA UA-5200 Series, User Manual

Page: 36 / 233

UA-5200 Series User Manual V4.3 ICP DAS
36
3.3. Setting Procedures and Steps

Procedures for Project/Function Setting:
The function setting procedure for the UA series controllers is to set up from the left to the
right of the main menu functions. The
“Function Wizard” even provides the “Step Box” for
new users to follow the steps and prevent from selecting the wrong function, e.g. the steps
of the commonly used project about the Modbus communication and conversion with the
OPC UA protocol are listed as follows:
Function/Project Procedures:
Controller Setting > Module Setting > Connecting OPC UA (in IoT Platform) > Conversion >
File Setting > Execution
Main Menu:
Step Box of the Function Wizard:
The chapter 2 provides an example for user to quickly know the setting procedure, and the
chapter 4 provides various commonly used projects and functions for user to apply.

Steps for List Setting:
About the List setting of module, connection
…, they have the similar steps as below:
1. Select the port number, name
… for the list (module, connect…)
2. Give a name or nickname, normally default name: Name
3. Click the button [ ] to add a list of module, connect
…
4. Click the button [Edit] to enter the Content Setting page
5. Set up the list content, and then click [Save] to back to the list page.
EX: Modbus TCP Module List:
2. Give the name
3. Click add
1.
Select the port
4. Click Edit to set the content