ICP DAS USA UA-5200 Series, User Manual

Page: 96 / 233

UA-5200 Series User Manual V4.3 ICP DAS
96
MQTT Connection > Microsoft Azure Platform > Azure List > Azure Content Settings
Azure Name Azure name. User can define the name. Default: Name.
SAS Token Input the SAS Token which you previously registered for the UA
controller from Microsoft Azure. For the procedure to generate a
SAS Token, please refer to the “Documentation > Azure IoT Hub >
IoT Hub MQTT support” section on the Microsoft Azure Web Site
for detailed information.
Keep Alive
Time(second)
Set the time in second that pass away without communication
between the UA controller and Microsoft Azure. Default: 60 second.
Scan Rate(ms) Set an update frequency for the task data. Default: 1000 (Unit: ms)
Dead Band Give a dead bend value for updating a float signal. Default: 0
CDS
(Connected
Device Studio)
If user wants to publish the messages compliant with the Microsoft
CDS platform, user must check the "CDS
” to Enabled and fill in the
Company ID, Equipment ID and Message ID that applied from the
Microsoft CDS platform.
OK Click to save and exit this page.