ICP DAS USA UA-5200 Series, User Manual

Page: 185 / 233

UA-5200 Series User Manual V4.3 ICP DAS
185
When entering the menu [Convert Setting] and the sub-menu [MQTT] > Modbus TCP
(Master), the Modbus TCP modules preset in the [Module Setting] will show up in the
Module List. (Refer to Chapter 6 for the Module Setting.)
Convert Setting > MQTT > Modbus RTU (Master) Module List
No. The module number in the module list (Not editable here)
*Module Name
/ Nickname
The module name set in the module list (Not editable here)
All Enabled Check [All Enabled] box to enable all modules in list for conversion.
Default: Uncheck.
Check the box of each module can enable just that module for
conversion.
Edit Click to enter the
“MQTT Client Setting” page to set up the Topic,
QoS, Publish, Subscribe
…
The page number of the module list: Current page / Total pages. Click
< or > to go to the previous or next page.
Save Click to save the settings of this page.
Click [
Edit ] button cauld enter the
“MQTT Client Setting” page.