ICP DAS USA UA-5200 Series, User Manual

Page: 54 / 233

UA-5200 Series User Manual V4.3 ICP DAS
54
Step 2. Module Setting
Click the next step, and enter the Step 2 [Module Setting]. This page is for setting the
communication values of the connected modules.
The Ethernet port is LAN for connecting with the TCP module, and each module can
give a name (Default name: Name). Click [ ] button could add a new module, and
then click [Edit] button to configure the module content and the Modbus mapping table.
Add a module (No.: 1, Name: DL-302) as below, and then click [Edit] button to enter the
“Module Content Setting” page.
If set up a wrong module, user can click the box in the left side of the module number
and click the [Remove] button to delete the module.
Click [Edit] can enter the [
MQTT Client Setting ] page to set up the MQTT Client and
the MQTT Variable and the MQTT Variable table.
3.
Give a name,
Ex : Model name
DL-302
Default: Name
2. Ethernet port: LAN
5
1
4.
Click to add