ICP DAS USA UA-5200 Series User Manual Download Page 129

Page: 129 / 233

UA-5200 Series User Manual V4.3 ICP DAS

129

5.3. Network Setting

Network Setting provides the function to display and set the network settings, including IP
address, host controller, DDNS, etc.

System Setting > Network Setting > Network Setting (LAN1)

Connection

Mode

Specify an IP address

: It's the fixed IP mode. Users input the values

in the fields of IP, Mask and Gateway according to customer's network.

Detail information for the factory default value of UA controller network

refers to the

Section 2.2.1

Obtain an IP address automatically (DHCP)

: It

’s the

Dynamic Host

Configuration Protocol mode. The system assigns the IP, Mask and

Gateway automatically.

The IP address of this UA-5200. Factory Default: 192.168.255.1

Mask

The mask address of this UA-5200. Factory Default: 255.255.0.0

Gateway

The gateway address of this UA-5200. Factory Default: 192.168.1.1

Save

Click to save the settings of this item.

System Setting > Network Setting > Hostname Setting

Hostname

The host name of this UA-5200. Default: system value. User can give

a new name, but cannot be null.

Save

Click to save the settings of this item.

Summary of Contents for UA-5200 Series









































































































































































































































Search results

Summary of Contents for UA-5200 Series

Reviews:

Related manuals for UA-5200 Series

Brands by name

Popular brands

ICP DAS USA UA-5200 Series, User Manual

Search results

Summary of Contents for UA-5200 Series

Reviews:

Related manuals for UA-5200 Series

Brands by name

Popular brands