UA-5200 Series User Manual V4.3 ICP DAS
119
Note
: The
“Event Name” and “Key” are set in the IFTTT website. If you are not
familiar
with IFTTT, p
lease see the
Appendix C
for the setting introductions.
Advanced Setting > IFTTT Condition Trigger > Content Setting
Event Name
Input the
“Event Name” setting in the IFTTT website. (
Append. C
)
Key
Input the
“Key” getting from the IFTTT website. (
Append. C
)
Status
Check to enable the IFTTT condition trigger event.
Advanced Setting > IFTTT Condition Trigger > Condition Setting
Module
Variables
Select the module and variable for the condition trigger.
Module Type: select the module type, Modbus RTU/TCP/ASCII
…
Module Name: select the module that set for condition trigger.
Variable Attribute: select the variable attribute for condition trigger.
Variable Name: select the variable name for condition trigger.
The following condition fields may different depending on the selected variable
attribute. The condition trigger method will be descripted after this table.
Operator
Select the operator for the trigger condition.
Value
Set up the value for the condition, include Type and Dead Band.
Status
Set up the
status for the condition.
Default: 0.
Add
Click to add a condition trigger list in the Condition Table..
Summary of Contents for UA-5200 Series
Page 13: ...UA 5200 Series User Manual V4 3 ICP DAS 13 1 5 Appearance UA 5231...
Page 14: ...UA 5200 Series User Manual V4 3 ICP DAS 14 UA 5231M...
Page 15: ...UA 5200 Series User Manual V4 3 ICP DAS 15 UA 5231M 3GWA 4GE 4GC...
Page 225: ...UA 5200 Series User Manual V4 3 ICP DAS 225 The LINE APP messages received on the mobile phone...
