ICP DAS USA UA-5200 Series, User Manual

Page: 69 / 233

UA-5200 Series User Manual V4.3 ICP DAS
69
Step 9. Enable Converting Module
Click the next step, and enter the Step 3 [Enable Converting Module] UI setting
This step is for enabling the module for the Modbus TCP / MQTT conversion.
We select the
“Modbus TCP / MQTT” conversion at the beginning, so this step will auto
enter the [ MQTT > Modbus TCP (Master) ] page of Conversion setting. The
“Step Box”
will prevent the user from selecting the wrong platform.
Convert Setting > MQTT > Modbus TCP (Master) Module List
No. The module number in the module list (Not editable here)
*Module Name
/ Nickname
The module name set in the module list (Not editable here)
All Enabled Check [All Enabled] box to enable all modules in list for
conversion. Default: Uncheck.
Check the box of each module can enable just that module for
conversion.
Edit Click to enter the
“MQTT Client Setting” page to set up the Topic,
QoS, Publish, Subscribe
…
The page number of the module list: Current page / Total pages.
Click < or > to go to the previous or next page.
Save Click to save the settings of this page.