ICP DAS USA UA-5200 Series User Manual Download Page 208

Page: 208 / 233

UA-5200 Series User Manual V4.3 ICP DAS

208

11. File Setting

File Setting

is the last (7

) item of the Main Menu, mainly to provide the settings about the

files, such as remove, update, upload and download the files of the project and certificate.

File Setting provides one sub-menu function

“Settings” and has 3 setting items. This

chapter will introduce the function items and setting parameters.

The setting procedure for the UA series controllers is to set up from the left to the right of

the main menu functions. User can find the procedure information in the following chapters.

3.3 Function Setting Procedure

2. Quick Start

4. Function Wizard

About the Web UI login information and the UI environment, please refer to

3. Web UI

Summary of Contents for UA-5200 Series









































































































































































































































Search results

Summary of Contents for UA-5200 Series

Reviews:

Related manuals for UA-5200 Series

Brands by name

Popular brands

ICP DAS USA UA-5200 Series, User Manual

Search results

Summary of Contents for UA-5200 Series

Reviews:

Related manuals for UA-5200 Series

Brands by name

Popular brands