ICP DAS USA UA-5200 Series User Manual Download Page 73

Page: 73 / 233

UA-5200 Series User Manual V4.3 ICP DAS

Modbus / MQTT JSON Conversion include the conversion of MQTT and Modbus RTU /

TCP / ASCII three protocols. With the MQTT Service function, users can set the MQTT

client to publish the message to the specified broker or subscribe the topic, and combine

several messages that converted in JSON format into a group to read and write the

multiple channels of the Modbus RTU devices that connected to the controller.

Modbus / MQTT JSON Function Diagram:

Application Solution:

The settings of Modbus RTU/ASCII are the same. Here will introduce them together as a

setting sample for Modbus / MQTT JSON conversion.

Summary of Contents for UA-5200 Series









































































































































































































































Search results

Summary of Contents for UA-5200 Series

Reviews:

Related manuals for UA-5200 Series

Brands by name

Popular brands

ICP DAS USA UA-5200 Series, User Manual

Search results

Summary of Contents for UA-5200 Series

Reviews:

Related manuals for UA-5200 Series

Brands by name

Popular brands