ICP DAS USA UA-5200 Series User Manual Download Page 194

Page: 194 / 233

UA-5200 Series User Manual V4.3 ICP DAS

194

9. Advanced Setting

Advanced Setting

is the fifth (5

) item of the Main Menu, mainly to provide advanced

monitoring and control related settings.

Advanced Setting provides virtual device function or cloud service function. The description

is listed on the page of the Main Menu. It will support more functions in the future.

There are 2 advanced setting functions now

“PID Operation” and “IFTTT Condition Trigger”.

This chapter will introduce the function items and setting parameters.

The setting procedure for the UA series controllers is to set up from the left to the right of

the main menu functions. User can find the procedure information in the following chapters.

3.3 Function Setting Procedure

2. Quick Start

4. Function Wizard

About the Web UI login information and the UI environment, please refer to

3. Web UI

Summary of Contents for UA-5200 Series









































































































































































































































Search results

Summary of Contents for UA-5200 Series

Reviews:

Related manuals for UA-5200 Series

Brands by name

Popular brands

ICP DAS USA UA-5200 Series, User Manual

Search results

Summary of Contents for UA-5200 Series

Reviews:

Related manuals for UA-5200 Series

Brands by name

Popular brands