IBM WebSphere XS40, Command Reference Manual

Page: 484 / 1066

query-param-namespace
Identifies the namespace in which to put all parameters that are specified in the
URL query string.
Syntax
query-param-namespace namespace
Parameters
namespace
Enter a valid namespace URL. Defaults to:
http://www.datapower.com/param/query
Related Commands
default-param-namespace , parameter
Examples
v
Assigns the namespace
http://www.example.com/queries
to all query parameters
in the client URL.
# query-param-namespace http://www.example.com/queries
#
request-attachments
Specifies the processing mode for SOAP attachments in client requests.
Syntax
request-attachment mode
Parameters
mode Specifies one of the following keywords to indicate the processing mode
for SOAP attachments:
allow Allows messages that contain attachments, and processes needed
attachments. Needed attachments are buffered, but attachments
that are not needed might be streamed directly to output.
Attachments are buffered when an action in the processing rule
requests any of the following:
v
Needed attachments
v All attachments in the package before the needed attachment
v
All attachments in the package for a needed manifest
v All attachments in the package if the package does not contain
the needed attachment
reject
Rejects messages that contain attachments.
strip (Default) Removes attachments from the message before
processing.
streaming
Allows messages that contain attachments in streaming mode, but
provides limited processing. Messages in the form of a
SOAP
458
Command Reference