IBM WebSphere XS40, Command Reference Manual, Page: 231 / 1066

Parameters
URL Specifies the location to send conformance reports. Use the following URL
format:
protocol://host/URI
Guidelines
The response-report-target command identifies where to send conformance reports
for responses. This command is meaningful only when the value for the
response-report-level command is always , failure , or warning .
Examples
v
Sends conformance reports for conformance failures for responses to
datapower.com/conform
with the HTTP protocol.
# response-report-level failures
# response-report-target http://datapower.com/conform/responses
result-is-conformance-report
Determines whether to use conformance analysis as output.
Syntax
result-is-conformance-report { on | off }
Parameters
on Delivers a conformance analysis as a
results
action.
off (Default) Delivers the original message, possibly modified by one or more
style sheets, to the next document processing action.
Guidelines
The result-is-conformance-report command indicates whether the conformance
analysis is delivered as a results action or is delivered to the next action in the
processing rule. When delivered as a results action, the intended purpose is with
a loopback XML firewall, which returns the results to the client.
Examples
v
Specifies that analysis results are used as output.
# result-is-conformance-report on
Chapter 9. Conformance Policy configuration mode
205