IBM WebSphere XS40, Command Reference Manual, Page: 875 / 1066

Chapter 99. Web Services Management Agent configuration
mode
This chapter provides an alphabetic listing of commands that are available in Web
Services Monitor Agent configuration mode. To enter this configuration mode, use
the Global
wsm-agent command.
All of the commands that are listed in “Common commands” on page 2 and most,
but not all, of the commands that are listed in Chapter 114, “Monitoring
commands,” on page 949 are also available in Web Services Monitor configuration
mode.
buffer-mode
Specifies a buffering strategy.
Syntax
buffer-mode { buffer | discard }
Parameters
buffer
Buffers transaction information for the current domain in the expectation
that a manager will connect. Buffering reduces the loss of transaction
accounting information, but at the cost of more memory consumed.
discard
Discards transaction information for the current domain.
Guidelines
Buffering Mode controls the behavior of the Web Services Management Agent
when there are no registered consumers of transaction events.
Records are accumulated until the configured size limits ( max-records and
max-memory ) are reached. After maximum configured values are reached, new
records will be dropped.
capture-mode
Specifies a message capture mode.
Syntax
capture-mode { all-messages | faults | none }
Parameters
all-messages
Captures all messages.
faults (Default) Captures fault messages.
none Does not capture messages.
© Copyright IBM Corp. 1999, 2008
849