IBM WebSphere XS40, Command Reference Manual

Page: 27 / 1066

Chapter 1. Initial login and common commands
This chapter provides an alphabetic listing of the commands that are available
before entering a specific configuration mode (available at initial login) and
commands that are available in most, if not all, configuration modes.
Initial login commands
For a list of the commands that are available after an initial login, refer to Table 1.
This table provides a listing of the available commands and their purpose. To
determine whether these commands are available to a specific user-type class after
an initial login, refer to Table 2.
Table 1. Initial login commands and their general purpose
Command Purpose
alias
1
Creates a command macro.
clock
1
Sets the date or time.
configure terminal Enters Global configuration mode.
disable
1
Enters User Mode.
disconnect Closes a user session.
echo Echoes text to the console.
enable Enters Privileged mode.
exec Calls and runs a target configuration script from another
configuration script.
exit Closes the CLI connection.
help Displays online help.
login Logs in to the appliance as a specific user.
ntp
1
Identifies an NTP server.
ping Determines if a target host is reachable on the network.
show Displays configuration or status information
shutdown
2
Restarts or shuts down the appliance.
switch domain Moves to a specified domain.
template
1
Runs an interactive command line script.
test schema
1
Tests conformity of an XML file against a schema.
test tcp-connection
1
Tests the TCP connection to a remote host.
top Returns users to their initial log in mode.
traceroute
1
Traces the network path to a target host.
1
Also available in Global mode.
2
Also available in Flash configuration mode.
Table 2. Commands by type of user that are available after initial login
Command admin user Privileged-type user User-type user
alias Yes Yes No
© Copyright IBM Corp. 1999, 2008
1