IBM WebSphere XS40, Command Reference Manual

Page: 1014 / 1066

var://service/transaction-rule-type
Gets the rule type of the transaction.
Persistent connection transaction variables
This section contains information about persistent connection variables in
alphabetic order by permission category. Table 21 lists the names and permission
for these variables.
Table 21. Names and permissions for variables that are available for persistent connections
Variable name Permission
var://service/connection/note
Read-write
var://service/persistent-connection-counter
Read-only
Read-only variables
var://service/persistent-connection-counter
Gets the persistent connection counter. This variable returns the number of
transactions that were completed on the current protocol session.
Read-write variables
var://service/connection/note
Gets or sets the annotation for the current connection. This variable allows
the user to annotate the current protocol session. The value could be an
identifier that could be used to maintain the state based on an existing
protocol session.
Routing transaction variables
This section contains information about routing variables in alphabetic order by
permission category. Table 22 lists the names and permission for these variables.
Table 22. Names and permissions for variables that are available for routing
Variable name Permission
var://service/routing-url
Write-only
var://service/routing-url-sslprofile
Write-only
Write-only variables
var://service/routing-url
For XML Firewall, Multi-Protocol Gateway, and Web Service Proxy
services, sets the routing URL. This variable can be set one time only and
takes the following format:
<dp:set-variable name="var://service/routing-url"
value="' protocol :// target / URI '" />
v For XML Firewall services:
– The protocol must be HTTP or HTTPS. If any other protocol, the
service generates an error.
– The URI is stripped. To specify the URI, use the
var://service/URI
variable, as shown in the following excerpt:
<dp:set-variable name="'var://service/routing-url'"
value="'http://10.10.36.11:2064'" />
<dp:set-variable name="'var://service/URI'"
value="'/services'" />
v
For Multi-Protocol Gateway and Web Service Proxy services:
988
Command Reference