IBM WebSphere XS40, Command Reference Manual

Page: 147 / 1066

Examples
v
Enter the URL Rewrite Policy configuration mode to create the
RW-1
URL
Rewrite Policy. Adds a rule to the URL Rewrite Policy. Applies the changes and
returns to Global configuration mode.
# urlrewrite RW-1
URL rewrite policy configuration mode
# rewrite
(.*)xsl=(.*)\?(.*) $1xsl=ident.xsl?$3 http://mantis:8000/$2
# exit
v Tests a candidate URL against the URL Rewrite Policy.
# test urlrewrite RW-1
http://mantis:8000/foo/bar/my.cgi?x=y&xsl=style.xsl?/input.xml
input replace -> http://mantis:8000/foo/bar/my.cgi?x=y&xsl=ident.xsl?/input.xml
style replace -> http://mantis:8000/style.xsl
#
tfim
Enters TFIM configuration mode.
Syntax
tfim name
Parameters
name is a required string that identifies the TFIM object.
The name can contain a maximum of 128 characters. For restrictions, refer
to “Object name conventions” on page xxiv.
Guidelines
In TFIM (IBM Tivoli Federated Identity Manager) configuration mode, you
configure a TFIM object that provides the information needed to locate and access
a TFIM server.
Use the cancel or exit command to exit TFIM configuration mode and return to
Global configuration mode.
TFIM is a licensed feature, and requires the presence of a TAM license on the
DataPower appliance. Contact your IBM representative, to obtain the needed
license.
Related Commands
cancel , exit
throttle
Specifies appliance behavior when faced with a low memory condition.
Syntax
throttle throttle-threshold kill-threshold timeout
no throttle
Chapter 2. Global configuration mode
121