IBM WebSphere XS40, Command Reference Manual

Page: 878 / 1066

You can use wildcards to define a match pattern as follows:
* The string wildcard matches 0 or more occurrences of any character.
? The single character wildcard matches one occurrence of any single
character.
[] The delimiters bracket a character or numeric range:
[1-5] Matches 1, 2, 3, 4, or 5
[xy] Matches x or y
Guidelines
The
frontend-url
specifies the URL that the client uses to access the WSDL the is
monitored by the current Web Service Monitor. This URL might or might not be
identical to the one specified by the
endpoint-url command.
operation
Specifies the administrative operations to monitor.
Syntax
operation type target threshold value action
Parameters
type Specifies the operations to monitor. Specify the following keyword:
all Monitors all WSDL-defined operations.
target Specifies whether to monitor errors or transactions. Specify one of the
following keywords:
front Monitors error counts
rate Monitors transaction counts
threshold
Specifies the threshold level. Use one of the following keywords:
v
low
v
high
For example, as transaction rates rise, the first limit might be reached at
100 transactions per second, at which some action can be taken. The
second limit might be reached at 300 transactions per second, at which
some other action can be taken.
value Specifies the point (expressed in instances per second) at which the
associated trigger (
low or high ) is fired.
action Specifies the administrative response to the firing of a trigger. Use one of
the following keywords:
log Generates a log message
throttle
Queues as out-of-limits traffic
852
Command Reference