IBM WebSphere XS40, Command Reference Manual, Page: 35 / 1066

exit
Applies changes to the current object and returns to the parent configuration
mode.
Syntax
exit
Guidelines
The exit command applies all changes made to the object to the running
configuration. To save these changes to the startup configuration, use the write
mem command.
When issued from User Mode or Privileged Mode, the exit command closes the
CLI connection. In all other modes, the command returns to its parent mode. When
issued from the top most parent, the command closes the CLI connection.
Related Commands
cancel , disable , write mem (Global)
Examples
v
Closes the CLI connection from User or Privileged Mode.
# exit
v
Applies all changes made to the Crypto Validation Credentials object. Leaves
this Crypto Validation Credentials configuration mode, and returns to Crypto
configuration mode. Leaves Crypto configuration mode and returns to Global
configuration mode. Persists the changes made to all object during this session
to the startup configuration. Closes the CLI connection.
(config crypto-val-credentials)# exit
(config crypto)# exit
(config)# write mem
(config)# exit
help
Displays online help.
Syntax
help [ command ]
? [ command ]
Parameters
command
Specifies the command name.
Examples
v
Displays a list of commands available in Privileged Mode.
# help
v
Displays help for the shutdown command.
# help shutdown
Chapter 1. Initial login and common commands
9