IBM WebSphere XS40, Command Reference Manual

Page: 791 / 1066

Examples
v
Adds the HTTP
TRACE
method to the default methods (
GET
,
POST
and
HEAD
) to
allow.
# request-methods GET+POST+HEAD+TRACE
#
request-nonxml-policy
Determines how to handle non-XML content.
Syntax
request-nonxml-policy
{
nothing
|
side
|
binary
}
Parameters
nothing
(Default) Performs no processing.
side The appliance executes the Non-XML Processing Rule specified. This rule
cannot alter the content of the request (cannot access the
INPUT
and
OUTPUT
contexts). The Rule can perform such actions as authenticate and authorize,
or send a copy of the request content to a third destination.
binary The appliance executes the Non-XML Processing Rule specified. The
request payload is submitted as a non-parsed binary object. This rule can
alter the content of the request. The Rule can perform such actions as
authenticate and authorize, convert to XML, repackage with additional
information retrieved from elsewhere and/or send a copy of the request
content to a third destination. The result of this rule is then used as the
request payload for further processing.
Related Commands
request-nonxml-rule , request-xml-policy , request-xml-rule
request-nonxml-rule
Specifies the Processing Rule to apply to non-XML content.
Syntax
request-nonxml-rule name
Parameters
name Specifies the name of an existing Processing Rule.
Guidelines
Specifies the Processing Rule to apply to non-XML content when the
request-nonxml-policy
is either
side
or
binary
.
Related Commands
request-nonxml-policy , request-xml-policy , request-xml-rule , rule (Global)
Chapter 94. Web Application Request Profile configuration mode
765