IBM WebSphere XS40, Command Reference Manual

Page: 963 / 1066

xmlns:dpconfig="http://www.datapower.com/param/config"
Use the no parameter command to delete a parameter and associated value.
Related Commands
default-param-namespace , query-param-namespace
Examples
v
Makes a parameter-value pair available to the current XSL Proxy.
# parameter foo BAR
#
v
Makes a single parameter-value pair available to the current XSL Proxy.
{http://www.example.com}
designates the parameter namespace.
# parameter {http://www.example.com}foobar test
#
v
Makes a single parameter-value pair available to the current XSL Proxy.
{}
designates no namespace.
# parameter {}foobar value
#
v
Deletes the
foo
parameter.
# no parameter foo
#
v
Deletes all parameters.
# no parameter
#
priority
Assigns a service-level priority.
Syntax
priority { low | normal | high }
Parameters
low
Receives below normal priority for scheduling or for resource allocation.
normal
(Default) Receives normal priority for scheduling or for resource allocation.
high Receives above normal priority for scheduling or for resource allocation.
port
Specifies the local port monitored for incoming traffic.
Syntax
port
port
Parameters
port Specifies the port.
Chapter 112. XSL Proxy Service configuration mode
937