IBM WebSphere XS40, Command Reference Manual

Page: 749 / 1066

Guidelines
You must assign a password to a newly created account.
Related Commands
access-level , group
snmp-cred
Adds SNMP V3 credentials to this account.
Syntax
snmp-cred engine-ID authentication-protocol authentication-secret-type
authentication-secret privacy-protocol privacy-secret-type privacy-secret
Parameters
engine-ID
Specifies the engine ID of the SNMP V3 engine for which this account is
being defined. A value of
0 is the shorthand representation of the engine
ID of the local SNMP V3 engine on the DataPower appliance. For any
other engine ID, the value is a hexadecimal string that represents the five-
to 32-byte value.
authentication-protocol
Identifies which authentication protocol to use.
none The account has no authentication key.
md5 The account uses HMAC-MD5-96 as the authentication protocol.
sha (Default) The account uses HMAC-SHA-96 as the authentication
protocol.
authentication-secret-type
Indicates whether the authentication secret is a password or a fully
localized key. This parameter is required when the value for
authentication-protocol is md5 or sha .
password
(Default) The authentication secret is a password that will be
converted to an intermediate key with a standardized algorithm,
and then localized against the engine ID value.
key The authentication secret is a fully localized key. Specifying a fully
localized key is useful when the key was initially created on
another system.
authentication-secret
Specifies the secret, or key, for authentication for this account. This
parameter is required when the value for
authentication-protocol is md5 or
sha .
v
If a password, specify a plaintext password that is at least eight
characters long.
v
If a key and HMAC-MD5 is the authentication protocol, specify the
hexadecimal representation of a 16-byte key.
v
If a key and HMAC-SHA-96 is the authentication protocol, specify the
hexadecimal representation of a 20-byte key.
Chapter 88. User configuration mode
723