IBM WebSphere XS40, Command Reference Manual

Page: 1020 / 1066

input context to a dp:url-open() extension function or to a results action or
to a fetch action to override the selection of an SSL Proxy Profile. For
instance:
results tmpvar2 https://foo.bar.com/foome.asp tmpvar3
would normally use the SSL Proxy Profile that is associated with any
user-agent configuration for the URL
https://foo.bar.com/foome.asp
If the profile needed to be determined programmatically, perhaps based on
AAA, it could be set up as follows to dynamically resolve the value of
*sslprofiletouse
:
setvar tmpvar2 var://local/_extension/sslprofile
var://context/notepad/sslprofiletouse
results tmpvar2 https://foo.bar.com/foome.asp tmpvar3
var://local/_extension/timeout
Sets the request timeout on an input context to override any previously set
timeout parameter. Set the value in seconds.
System variables
This section contains information about system variables in alphabetic order by
permission category. Table 27 lists the names and permission for these variables.
Table 27. Names and permissions for system variables
Variable name Permission
var://system/map/debug
Read-write
var://system/tasktemplates/debug
Read-write
Read-write variables
var://system/map/debug
Gets or sets the debugging level for role-based management (RBM).
var://system/tasktemplates/debug
Gets or sets the debugging level for task templates.
994
Command Reference