IBM WebSphere XS40, Command Reference Manual

Page: 591 / 1066

on-error
Adds an
on-error
action.
Syntax
on-error mode [ rule ] [ input-context ] [ output-context ]
Parameters
mode Specifies the operational response to an error and takes one of the
following forms:
abort
Indicates that processing ceases in the event of an error.
continue
Indicates that processing continues with the next action in the
event of an error.
rule Optionally specifies an error rule that is executed in the event of an error
condition.
input-context
Optionally identifies the input context for the error rule. If no context is
explicitly identified, the input context of the failed action is used.
output-context
Optionally identifies the output context for the error rule. If no context is
explicitly identified, the output context of the failed action is used.
Examples
v
Specifies that rule processing ceases in the event of an error; calls the rule,
faultProcessing
, as an error handler.
# on-error abort faultProcessing
#
output-filter
Specifies a compression algorithm to apply to all outgoing traffic after all other
processing occurs.
Syntax
output-filter { zip | pkzip | none }
Parameters
zip Compresses all incoming traffic with the ZIP algorithm.
pkzip Compresses all incoming traffic with the PKZIP algorithm.
none (Default) Does not compress outgoing traffic.
Examples
v
Compresses all outgoing traffic with PKZIP.
# output-filter pkzip
#
v
Restores the default state, outgoing traffic is not compressed.
Chapter 62. Processing Rule configuration mode
565