IBM WebSphere XS40, Command Reference Manual

Page: 805 / 1066

Chapter 96. Web Application Session Management Policy
configuration mode
This chapter provides an alphabetic listing of commands that are available in Web
Application Session Management Policy configuration mode.
To enter this configuration mode, use the Global webapp-session-management
command. The Global command creates the Web Application Session Management
Policy if the Policy does not exist. While in this mode, define the parameters for
the Web Application Session Management Policy object.
All of the commands that are listed in “Common commands” on page 2 and most,
but not all, of the commands that are listed in Chapter 114, “Monitoring
commands,” on page 949 are also available in Web Application Session
Management Policy configuration mode.
allow-cookie-sharing
Enables or disables the use of cookies by more than one Internet address.
Syntax
allow-cookie-sharing
{
on
|
off
}
Parameters
on Makes the session cookie address independent.
off (Default) Cookies cannot be shared by IP addresses.
Guidelines
The allow-cookie-sharing command enables or disables the use of cookies by more
than one Internet address. Enabling cooking-sharing is useful when the remote
client is behind a proxy. Normally the session cookie contains the client IP address,
and this prevents them from using the session on any other host. Some proxy
server environments might make this undesirable.
auto-renew
Enables or disables the automatic renewal of a session whenever the user takes
action.
Syntax
auto-renew { on | off }
on (Default) Renews the session lifetime on each use of the session.
off The session lifetime is the total amount of time to allow before returning to
the login section.
© Copyright IBM Corp. 1999, 2008
779