IBM WebSphere XS40, Command Reference Manual

Page: 951 / 1066

Chapter 110. XPath Routing Map configuration mode
This chapter provides an alphabetic listing of commands that are available in
XPath Routing Map configuration mode. To enter this configuration mode, use the
Global
xpath-routing command.
All of the commands that are listed in “Common commands” on page 2 and most,
but not all, of the commands that are listed in Chapter 114, “Monitoring
commands,” on page 949 are also available in XPath Routing Map configuration
mode.
namespace-mapping
Adds XML namespace data.
Syntax
namespace-mapping prefix URI
Parameters
prefix Specifies the namespace prefix.
URI Specifies the namespace location.
Examples
v
Creates the
Departmental
XPath Routing Map and enters XPath Routing Map
configuration mode. Adds XML namespace data.
# xpath-routing Departmental
XPath Routing Map configuration mode
# namspace-mapping dp http://www.datapower.com/extensions
#
rule
Creates a forwarding rule.
Syntax
rule expression host port { on | off }
Parameters
expression
Specifies an XPath expression.
host Identifies the destination by host name or by IP address.
port Identifies a port number on the destination host. Use an integer in the
range of 0 to 65535.
on | off
Indicates whether to use a secure connection to the destination.
on Uses a secure connection
off Uses a nonsecure connection
© Copyright IBM Corp. 1999, 2008
925