IBM WebSphere XS40, Command Reference Manual

Page: 762 / 1066

outbound-priority
Sets the priority of outbound packets.
Syntax
outbound-priority priority
Parameters
priority
Specifies the priority value. Use an integer in the range of 0 through 7. The
default is 0.
Guidelines
The outbound-priority command sets the priority value to place in outgoing
VLAN headers for packets that sent on this VLAN interface. This value is placed
in the
user_control
field of the Tag Control Information (TCI).
The exact interpretation of the value depends on the VLAN switch configuration.
Examples
v
Set the priority to 4
# outbound-priority 4
packet-capture
Initiates a packet-capture session on the current interface.
Syntax
Starts a package capture
packet-capture filename duration kilobytes
Immediately stops a package capture
no packet-capture filename
Parameters
filename
specifies the file to which packet-capture data is written.
duration
is an integer (within the range 5 through 3600) that specifies the maximum
duration, in seconds, of the packet-capture session. A value of
-1
indicates
that the packet capture completes when the maximum file size is reached
or until you invoke the
no packet-capture command.
kilobytes
Specifies the maximum size, in kilobytes, of the packet-capture file. Use an
integer in the range of 10 through 50000.
Guidelines
Packet-capture date is saved in a pcap format. Use a utility such as tcpdump or
ethereal to interpret the packet-capture file.
736
Command Reference