IBM WebSphere XS40 Page 428 Command Reference Manual Download

Page: 428 / 1066

retry (deprecated)

Comments

Deprecated command. Has no effect.

rotate

Sets the maximum number of file rotations.

Syntax

rotate

count

Parameters

count

Specifies how many times to rotate a log file. Use an integer in the range
of 1 through 100. The default is 3.

Guidelines

The

rotate

command specifies the maximum number of rotations for the log file.

Depending on the Machine Type of the appliance, the location of the file can be the
local file system, the compact flash, or the hard disk array.

Type 7993 (9003)

Supports only the local file system.

Type 9235

Supports the local file system and the model-specific, auxiliary data storage
(compact flash or hard disk array).

The compact flash provides 512 MB of storage.

The hard disk array provides 70 GB of storage.

Assuming a file name of

CryptoLog

and three rotations, the directory that contains

the log file can consist of up to the following four local files:

CryptoLog

The current log file

CryptoLog1

The log file that was most recently archived.

CryptoLog2

The log file that was next most recently archived.

CryptoLog3

The oldest log file

This command is meaningful only when the following conditions are met:

The log type, as specified by the

type

command is

file

The archival mode, as specified by the

archive-mode

command, is

rotate

Related Commands

archive-mode

type

402

Command Reference

Summary of Contents for WebSphere XS40











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WebSphere XS40

Reviews:

Related manuals for WebSphere XS40

Brands by name

Popular brands

IBM WebSphere XS40, Command Reference Manual

Search results

Summary of Contents for WebSphere XS40

Reviews:

Related manuals for WebSphere XS40

Brands by name

Popular brands