![background image](http://html1.mh-extra.com/html/bandb/spectre-lte/spectre-lte_quick-start-manual_3069015001.webp)
Product Overview
1
1
4
Configure the Router
3
Attach Power
2
You may configure the router via a web browser or Telnet.
Default Router IP Address =
192.168.1.1
Default Username =
root
Default Password =
root
Detailed configuration data is included on your installation
CD and also on our web site.
Your router will not work unless the antennas are attached
and power is supplied. Some models also require installed,
activated SIM cards.
Insert SIM card
Attach Antennas
Powering the router with no antenna attached can
damage the router.
Cellular
antenna
to “DIV”.
Cellular
antenna
to “ANT”
.
Power
Ethernet/WAN Port
USB Port
I/O Port
802.15.4e
Antenna
Connector
Aux Ports
Reset Switch
LEDs
RT Routers
802.15.4e
antenna to
“AUX”.
Power LED
Power
Ethernet/WAN Port
USB Port
I/O Port
802.15.4e
Antenna
Connector
Aux Ports
Reset Switch
LEDs
3G/LTE Routers
RT Routers
Cellular
Antenna
Connector
Cellular
Antenna
Connector
SIM card 1
SIM card 2
3G/LTE Routers
802.15.4e
antenna to
“AUX”.
Some service providers require installed,
activated SIM cards in order to establish
communications. For the corresponding
router models, open the SIM card holder
by pressing the small button to the right
of the SIM card holder.
The router has built-in protection
against reverse polarity. Apply
+10 to +30 V DC, or connect the
included AC power adapter.
Connect Ethernet
You will use an Ethernet connection to
configure the router and to
communicate with it.
5
6
Set Up Mobile Connection
(Cellular Routers Only)
3G
– Click “Mobile WAN” under “Configuration”.
Select your carrier under the primary SIM card drop
down menu. Enter APN and credentials given from your
provider. Apply changes.
Note: Sprint requires extra steps. Please see
Configuration Manual section “Sprint CDMA network
connection” for instructions.
Common APN Examples
Verizon: No APN required
AT&T: isp.cingular or wap.cingular
Sprint: No APN required
T-Mobile: epc.tmobile.com
Rogers: internet.com
TELUS: sp.telus.com
LTE
– Click “Mobile WAN’ under ‘Configuration”.
Enter APN and Credentials given from your provider.
Apply Changes.
Common APN Examples
Verizon: vzwinternet
AT&T: broadband