Epygi Quadro16x Manual Download

Page: 1 / 44

Epygi Technologies

Using Quadro Features on IP

Phones

Revision

Revised By

Date

Updated for 3.1.x image

AshotS, AramK, LianaB

Updated with feature codes for Aastra
9112i, Aastra 9133i

AshotA, AramS, LianaB

May 26, 2006

Quadro variants:

Quadro IP PBXs

Filename:

Quadro features on LAN IP Phones.doc

Version:

Template:

Support Template.dot

Last saved:

5/26/2006 8:42:00 PM by Liana Badalyan

Abstract:

This document explains how to use Quadro telephony

services on IP phones tested with the Quadro and provides with

the feature codes dialed on IP phones to access those services.

Please Note:

This document contains confidential and proprietary information owned by Epygi Technologies Ltd. Any copying, use or disclosure

of the document or the information contained herein without the written permission of Epygi Technologies Ltd. is strictly prohibited.

Summary of Contents for Quadro16x













































Search results

Summary of Contents for Quadro16x

Reviews:

Related manuals for Quadro16x

Brands by name

Popular brands

Epygi Quadro16x, Manual

Search results

Summary of Contents for Quadro16x

Reviews:

Related manuals for Quadro16x

Brands by name

Popular brands