IBM TotalStorage NAS Gateway 500, Service Manual

Page: 215 / 471

Table 16. Service processor error codes (continued)
Error code Description Action or
possible failing FRU
406E 0EB9 Attention line 8 stuck fault Go to “MAP 1540: Problem Isolation Procedures”
on page 69.
406E 0EBA Attention line 9 stuck fault Go to “MAP 1540: Problem Isolation Procedures”
on page 69.
406E 0EBB Attention line 10 stuck fault Go to “MAP 1540: Problem Isolation Procedures”
on page 69.
406E 0EBC Attention line 11 stuck fault Go to “MAP 1540: Problem Isolation Procedures”
on page 69.
406E 0EE1 Service processor firmware: invalid MRU to FRU
mapping.
1. Check for system firmware updates.
2. Call service support.
406E 0EE2 Service processor firmware fault
1. Check for system firmware updates.
2. Call service support.
406E 0EE5 Firmware error, no callout available
1. Check for system firmware updates.
2. Call service support.
406F 0001 Scan interface basic assurance tests detected a
CEC backplane fault.
CEC backplane
Location code: U0.1-P1
406F 0002 CEC backplane fault
1. Check JTAG cable connections.
2. CEC backplane
Location code: U0.1-P1
406F 0003 Scan interface basic assurance tests detected
processor fault.
1. Check JTAG cable connections.
2. Processor card
Location code: U0.1-P1-C1
406F 0004 Processor fault
1. Check JTAG cable connections.
2. Processor card
Location code: U0.1-P1-C2
406F 000E Processor capacity card Operator panel
Location code: U0.1-L1
406F 0010 DIMM fault DIMM
Location code: U0.1-P1-C1-M8
406F 0011 DIMM fault DIMM
Location code: U0.1-P1-C1-M6
406F 0012 DIMM fault DIMM
Location code: U0.1-P1-C1-M1
406F 0013 DIMM fault DIMM
Location code: U0.1-P1-C1-M3
406F 0014 DIMM fault DIMM
Location code: U0.1-P1-C1-M7
406F 0015 DIMM fault DIMM
Location code: U0.1-P1-C1-M5
406F 0016 DIMM fault DIMM
Location code: U0.1-P1-C1-M2
406F 0017 DIMM fault DIMM
Location code: U0.1-P1-C1-M4
Chapter 5. Error code to FRU index
195