IBM TotalStorage NAS Gateway 500, Service Manual

Page: 197 / 471

Table 16. Service processor error codes (continued)
Error code Description Action or
possible failing FRU
406A 0013 DIMM fault DIMM
Location code: U0.1-P1-C1-M3
406A 0014 DIMM fault DIMM
Location code: U0.1-P1-C1-M7
406A 0015 DIMM fault DIMM
Location code: U0.1-P1-C1-M5
406A 0016 DIMM fault DIMM
Location code: U0.1-P1-C1-M2
406A 0017 DIMM fault DIMM
Location code: U0.1-P1-C1-M4
406A 0018 DIMM fault DIMM
Location code: U0.1-P1-C2-M8
406A 0019 DIMM fault DIMM
Location code: U0.1-P1-C2-M6
406A 001A DIMM fault DIMM
Location code: U0.1-P1-C2-M1
406A 001B DIMM fault DIMM
Location code: U0.1-P1-C2-M3
406A 001C DIMM fault DIMM
Location code: U0.1-P1-C2-M7
406A 001D DIMM fault DIMM
Location code: U0.1-P1-C2-M5
406A 001E DIMM fault DIMM
Location code: U0.1-P1-C2-M2
406A 001F DIMM fault DIMM
Location code: U0.1-P1-C2-M4
406A 00B0 Bus controller failure
1. Check for system firmware updates.
2. PCI riser card
Location code: U0.1-P2
406A 00B1 Bus controller failure
1. Check for system firmware updates.
2. PCI riser card
Location code: U0.1-P2
406A 00B3 MCM/VPD problem detected.
1. Check for system firmware updates.
2. Processor card 1
Location code: U0.1-P1-C1
406A 00B4 MCM/VPD problem detected.
1. Check for system firmware updates.
2. Processor card 2
Location code: U0.1-P1-C2
406A 00B7 Insufficient hardware resources were detected to
continue IPL of the system after processor
subsystem testing and initialization was
completed.
Go to “MAP 1540: Problem Isolation Procedures”
on page 69.
406A 00D1 Informational message Informational message
406A 0100 Memory extender 0 on processor card 1 Processor card,
Location code: U0.1-P1-C1
Chapter 5. Error code to FRU index
177