IBM SAN Volume Controller 2145-CG8, Hardware Installation Manual

Page: 5 / 110

Figures
1. Photo of the redundant ac-power switch . . . 2
2. A four-node SAN Volume Controller system
with the redundant ac-power switch feature .
. 3
3. Parts provided for SAN Volume Controller
2145-CG8 hardware installation in a rack .
. . 8
4. Attaching the mounting plates . . . . . . 13
5. Power cable clips . . . . . . . . . . 14
6. Positioning the clips. . . . . . . . . . 15
7. Positioned in rack . . . . . . . . . . 15
8. Installing the 2145 UPS-1U mounting brackets
for the 2145 UPS-1U
. . . . . . . . . 18
9. Adjusting the rail depth on the 2145 UPS-1U 18
10. Attaching the rear of the 2145 UPS-1U rail to
the rack .
. . . . . . . . . . . . . 19
11. Attaching the front of the 2145 UPS-1U rail to
the rack.
. . . . . . . . . . . . . 20
12. Mounting screws for the 2145 UPS-1U . . . 21
13. Removing the 2145 UPS-1U front panel 22
14. The 2145 UPS-1U internal battery connector
with protective tape .
. . . . . . . . . 22
15. The 2145 UPS-1U internal-battery connector 23
16. 2145 UPS-1U (rear view) . . . . . . . . 23
17. 2145 UPS-1U front-panel assembly . . . . . 24
18. 2145 UPS-1U power cable-retention bracket
hardware .
. . . . . . . . . . . . 25
19. 2145 UPS-1U power cable-retention bracket 25
20. SAN Volume Controller 2145-CG8
cable-management arm, support rails, and
associated parts .
. . . . . . . . . . 26
21. Opening the rear slide-rail hooks . . . . . 28
22. Installing the rear end of the slide rails 28
23. Preparing the front end of the slide rails 29
24. Installing the front end of the slide rails 29
25. SAN Volume Controller 2145-CG8
cable-management arm, support rails, and
associated parts .
. . . . . . . . . . 30
26. Installing the cable-management-support arm 31
27. Installing the cable-management arm . . . . 32
28. Adjusting the location of the
cable-management arm
. . . . . . . . 33
29. Connecting and routing the cables . . . . . 34
30. Installing the SAN Volume Controller
2145-CG8 node in the slide rails of the rack .
. 35
31. Raising the SAN Volume Controller 2145-CG8
locking levers of the slide rails of the rack .
. 35
32. Connecting the SAN Volume Controller power
cable to the 2145 UPS-1U .
. . . . . . . 36
33. SAN Volume Controller 2145-CG8
cable-retention brackets
. . . . . . . . 37
34. Connectors on the rear of the SAN Volume
Controller 2145-CG8
. . . . . . . . . 38
35. 10 Gbps Ethernet ports on the rear of the SAN
Volume Controller 2145-CG8 .
. . . . . . 39
36. SAN Volume Controller 2145-CG8 front panel 40
37. Front-panel display when push buttons are
pressed .
. . . . . . . . . . . . . 40
38. Node number . . . . . . . . . . . . 41
39. Ethernet: No Cluster . . . . . . . . . 41
40. SAN Volume Controller 2145-CG8 front panel 53
41. SAN Volume Controller 2145-CG8 or 2145-CF8
operator-information panel .
. . . . . . 55
42. SAN Volume Controller 2145-CG8 rear-panel
indicators .
. . . . . . . . . . . . 57
43. SAN Volume Controller 2145-CG8 rear-panel
indicators for the 10 Gbps Ethernet feature .
. 57
44. SAN Volume Controller 2145-CG8 or 2145-CF8
ac, dc, and power-error LEDs
. . . . . . 58
45. Connectors on the rear of the SAN Volume
Controller 2145-CG8
. . . . . . . . . 60
46. 10 Gbps Ethernet ports on the rear of the SAN
Volume Controller 2145-CG8 .
. . . . . . 60
47. Power connector . . . . . . . . . . . 61
48. Service ports of the SAN Volume Controller
2145-CG8 .
. . . . . . . . . . . . 61
49. SAN Volume Controller 2145-CG8 port not
used .
. . . . . . . . . . . . . . 62
50. Physical Fibre Channel port numbers for the
SAN Volume Controller 2145-CG8 .
. . . . 62
51. 2145 UPS-1U front-panel assembly . . . . . 62
© Copyright IBM Corp. 2012
v