IBM SAN Volume Controller 2145-CG8, Hardware Installation Manual

Page: 71 / 110

languages, you can switch between the panel text and the additional data
by pressing and releasing the select button.
Additional data is unavailable when the front panel displays a menu
option, which ends with a question mark (?). In this case, press and release
the select button to choose the menu option.
If the battery needed to be charged, the
Charging
or
Recovering
message is
replaced by the Cluster: message when the battery is fully charged. The
progress bar no longer displays. The installation of the SAN Volume
Controller hardware is now complete. No software installation is required.
Continue with the instructions in the
IBM System Storage SAN Volume
Controller Software Installation and Configuration Guide to create, if necessary, a
new SAN Volume Controller clustered system and to add the nodes into a
SAN Volume Controller system.
The
IBM System Storage SAN Volume Controller Software Installation and
Configuration Guide and other publications in the SAN Volume Controller
library are available in Adobe portable document format (PDF) from the
following website:
www.ibm.com/storage/support/2145
Chapter 2. Installing the SAN Volume Controller 2145-CG8 hardware
43