IBM SAN Volume Controller 2145-CG8, Hardware Installation Manual

Page: 27 / 110

www-947.ibm.com/support/entry/portal/Troubleshooting/Hardware/
System_Storage/Storage_software/Storage_infrastructure_management/
System_Storage_Productivity_Center_(SSPC)/
3.
Configure the optional SSPC.
The IBM System Storage Productivity Center User's Guide describes how to
configure the SSPC for the SAN Volume Controller.
4. Create a SAN Volume Controller system.
The IBM System Storage SAN Volume Controller Software Installation and
Configuration Guide describes this procedure, which is completed in two phases:
a. Use the Create Cluster action on the front panel of one of the SAN Volume
Controller nodes that you have installed to create the system.
This procedure is usually performed by an IBM representative or IBM
Business Partner using information that the customer provides.
b. Follow the Setup wizard in the management GUI to perform the initial
system configuration.
The IBM System Storage SAN Volume Controller Software Installation and
Configuration Guide describes how to perform these steps. The IBM System
Storage SAN Volume Controller Software Installation and Configuration Guide and
other publications in the SAN Volume Controller library are available in Adobe
portable document format (PDF) from the following website:
www.ibm.com/storage/support/2145
Installation and configuration overview
xxvii