IBM SAN Volume Controller 2145-CG8, Hardware Installation Manual

Page: 40 / 110

Optionally installing the redundant ac-power switch
Use the redundant ac-power switch to make the SAN Volume Controller clustered
system more resilient to power failure.
Before you begin
DANGER
Multiple power cords: The product is equipped with multiple power cords.
To remove all hazardous voltages, disconnect all power cords. (L003)
or
The following topics describe the redundant ac-power switch installation tasks in
the order that they must be performed:
Procedure
1. Attach the mounting plates to the redundant ac-power switch.
2. Label the cables.
3. Connect the power input cables to the redundant ac-power switch.
4. Install the redundant ac-power switch in the rack.
5. Connect the redundant ac-power switch to the site power.
6. Test the redundant ac-power switch to ensure that it automatically switches
power supplies when the main power source fails or is restored.
Attaching the mounting plates to the redundant ac-power
switch
Attach the mounting plates to the redundant ac-power switch before you label the
cables.
svc00322
1 2
svc00323
1
2
12
SAN Volume Controller: Model 2145-CG8 Hardware Installation Guide