IBM SAN Volume Controller 2145-CG8, Hardware Installation Manual

Page: 58 / 110

About this task
The parts involved in installing the cable-management arm are shown in Figure 25.
Table 5. Cable-management arm and associated parts descriptions and quantities
Reference Description Quantity
1
Slide rail (left) 1
2
Slide rail (right) 1
3
M6 screws 4
4
Large cable tie 1
5
Cable ties 5
6
Cable-management support arm 1
7
Cable-management arm assembly 1
To attach the arm, perform the following steps:
Procedure
1. At the rear of the rack, install the cable-management-support arm.
Insert both ends of the cable management support arm into the slide rail, as
shown by Figure 26 on page 31.
Cable management arm kit
Friction rail kit
7
5
6
3
4
1
2
Figure 25. SAN Volume Controller 2145-CG8 cable-management arm, support rails, and associated parts
30
SAN Volume Controller: Model 2145-CG8 Hardware Installation Guide