IBM 86604RU - Netfinity 5500 - 4RU, Hardware Maintenance Manual

Page: 76 / 402

When you are finished accessing the system management
processor using a terminal program, select Disconnect
Current Logon from the main menu and then use the
terminal program to close the connection to the system
management processor.
System Power menu selections:
You can use the
selections available from the System Power menu to:
Ÿ
View data regarding the current server power status
Ÿ
View data regarding the server power configuration
Ÿ
Power the server off
Ÿ
Power the server on
To access these functions:
1. Use a terminal program to establish a connection with
the system management processor modem.
2. Log in to the system management processor.
When you have established a connection with the
system management processor, you will be prompted
for a username and password. You must provide a
username and password combination that has been
previously configured for use with the system
management processor. You can use one of two
username and password combinations:
Menu Selection Data Available for Viewing
Service Processor
Configuration System management processor
modem configuration, dial-out entries,
dial-out alerts, dial-in logins, system
status, thresholds, system statistics,
VPD information and system state
System Services Status of system management
processor watchdog timers and event
alerts sent to the server
System Power Current system power status,
power-off configuration and power-off
delay values.
Note
You can use selections available
from the System Power menu
to power the system on or off.
For more information, see
“System Power menu
selections” on page 68.
Boot You can use selections available from
the Boot menu to shutdown and
restart the system or to restart the
system management processor. For
more information, see “Boot menu
selections” on page 69.
Remote Terminal Status Current remote terminal status
Start Remote Video Use Start Remote Video to enable
the terminal program to remotely
monitor and manage the server during
POST. For more information, see
“Using remote video mode to monitor
and access POST” on page 71.
68
Netfinity Server HMM