Powering On and Off
2
When the self-diagnosis ends:
Connected to an AS/400 system:
Depending on the initialization, one if the following messages is dis-
played:
à
ð
NOT READY
á
ñ
à
ð
READY
á
ñ
If NOT READY is shown, continue to step 3.
Connected to a PC:
The following message is displayed; printing is enabled.
à
ð
READY
á
ñ
3
If NOT READY is displayed, press Start. The start light turns on. READY is
displayed in the LCD and printing is enabled.
Notes:
1. After powering on the printer, check the form position before printing.
2. If the Check lamp lights on or a message other than the above is displayed,
see Chapter 3, “Problem Determination Procedure.”
3. Connected to an AS/400 system: Start is not set to the ready status if the
printer is not connected to host system.
2-10
IBM 5400-006 Printer:
Setup Instruction and Operator's Guide
All manuals and user guides at all-guides.com