Multiple-Part Forms Glue Fastening Specifications
A.3 Multiple-Part Forms Glue Fastening Specifications
If multiple part continuous forms are used, be sure they conform to the following
specifications. (If they do not or you are not sure, run several test pages first to
ensure there are no problems.)
Notes:
1. Glue fastening must be performed on a point basis within 12.7 mm from the left
and right edges of the forms.
2. Sprocket holes must be free from glue.
3. Change in the form thickness due to glue fastening must be 0.05 mm or less.
A-4
IBM 5400-006 Printer:
Setup Instruction and Operator's Guide
All manuals and user guides at all-guides.com
