Unloading and Setting the Printing Form
5
Make sure that the jam sensor on the left tractor is clean. If it is dirty, clean it
with a soft cloth. (See 3.3, “Form Jam Recovery” on page 3-5.)
6
Open the front door load a new form from the form stand. Insert the form
into the form insertion slot and push it up to the height of the left and right
tractors.
Notes
Take the form out of the box before placing it in the form stand.
Leaving it in the box might cause a paper jam.
Set the form so that the left edge of the form is located to the left of
the EOF (End of Form) switch label.
2-24
IBM 5400-006 Printer:
Setup Instruction and Operator's Guide
All manuals and user guides at all-guides.com
