Connecting to the Host System
3
Continue pressing Set Up Mode until the following message is displayed.
à
ð
Printer Address
ð
á
ñ
If the message goes too far, press Line Feed until it returns.
4
Press Step Feed Up or Step Feed Down to select the address value at the
bottom of the LCD. In the following example, 3 is selected.
5
After selecting the printer address, press Entry. The Start lamp lights.
6
Press Cancel.
When formatting is finished, the IBM 5400-006 printer returns to the status
set just after the power is turned on. Wait a moment. (See 2.3.1, “Powering
On” on page 2-9.)
Chapter 1. Installation
1-23
All manuals and user guides at all-guides.com
