Setting the Test Form
7
Moving the tractors, position the form so that the print position scale (1-136)
is located within the form width. Push both lock levers backward to lock
them. Make sure not to loosen the form.
8
Turn the Form Feed knob and adjust the form perforation to the line scale
according to the form length (in this example, “11”).
Note: Make sure that the platen is not in the all release status. (See Note b
in step 2 on page 1-15.)
1-18
IBM 5400-006 Printer:
Setup Instruction and Operator's Guide
All manuals and user guides at all-guides.com