DANGER:
Do not open a cover not described in the operator's guide. It is dangerous because a live portion
applied with a high voltage exists in side the cover.
Do not modify this product as it might cause a fire or shock hazard.
Do not apply any voltage other than the indicated supply voltage as it might cause a fire or shock
hazard.
Neither use any cord other than the power cord supplied with the product nor use the supplied cord for
other than this product as it might cause a fire or shock hazard.
Do not scratch, damage or process the power cord. If a heavy thing is placed on it or if it is stretched
or bent forcibly, the power cord might be damaged to cause a fire or shock hazard.
DANGER:
Cable Installation and Removal Procedures
Electrical current from the power cord is hazardous. To avoid shock hazard, connect and disconnect
cables as follows when installing or moving this product.
– To connect:
1. Turn everything to Off.
2. Connect the interface cable.
3. Attach the power cord to outlet.
4. Set the device to On.
– To disconnect:
1. Turn everything to Off.
2. Remove the power cord from outlet.
3. Remove the all cables from device.
CAUTION:
When disconnecting the power plug, do not pull the power cord. The cord might be damaged and
cause a fire or shock hazard. (Always hold the plug portion and pull it for disconnection.)
Refer to “Environmental Conditions” described in this manual for the operating environment.
Do not install the product in a humid or dusty place as it might cause a fire or shock hazard.
Do not stop up the ventilation hole of the product. Otherwise, the inside of the product might be
heated abnormally to cause a fire.
iv
IBM 5400-006 Printer:
Setup Instruction and Operator's Guide
All manuals and user guides at all-guides.com
