IBM 265, Service Manual

Page: 229 / 365

The System Management Services screen contains the following choices.
Config: Enables you to view your system configuration. Go to “Config” on
page 214.
Multiboot: Enables you to set and view the default operating system, modify the
boot sequence, access the open firmware command prompt, and work with other
options. Go to “Multiboot” on page 215.
Utilities: Enables you to set and remove passwords, enable the unattended start
mode, set and view the addresses of your system’s SCSI controllers, select the
active console, view or clear the firmware error log, and update your system unit’s
firmware. Go to “Utilities” on page 218.
Exit: Returns you to the previous screen.
To select an icon, move the cursor with the arrow keys to choose which icon is
highlighted, then press the Enter key. You can also select an icon by clicking on it with
your left mouse button. To leave the current screen, either press the Esc key or select
the Exit icon.
Chapter 8. Using System Management Services
213