IBM 265, Service Manual

Page: 203 / 365

System Power Control Menu
The menu is used to set power control options.
SYSTEM POWER CONTROL MENU
1. Enable/Disable Unattended Start Mode:
Currently Disabled
2. Ring Indicate Power-On Menu
3. Reboot/Restart Policy Setup Menu
4. Power-On System
5. Power-Off System
6. Enable/Disable Fast System Boot:
Currently Disabled
7. Boot Mode Menu
98. Return to Previous Menu
99. Exit from Menus
1>
v
Enable/Disable Unattended Start Mode
Use this option to instruct the service processor to immediately power-on the server
after a power failure, bypassing power-on password verification. Unattended start
mode can be used on systems that require automatic power-on after a power failure.
Unattended start mode can also be set using SMS menus.
v
Ring Indicate Power-On Menu
Ring indicate power-on is an alternate method of dialing in without establishing a
service processor session. If the system is powered off and ring indicate power-on is
enabled, the system is powered on at the predetermined number of rings. If the
system is already on, no action is taken. In either case, the telephone call is not
answered. The caller receives no feedback that the system is powered on. The Ring
Indicate Power-On Menu and defaults are as follows:
Ring Indicate Power-On Menu
1. Ring indicate power-on:
Currently Disabled
2. Number of rings:
Currently 6
98. Return to Previous Menu
The number of rings can be set to any number greater than zero. The default value
is six rings.
Chapter 7. Using the Service Processor
187