Firmware Checkpoints
Firmware uses progress codes (checkpoints) in the range of E1xx to EFFF. These
checkpoints occur during system startup and can be useful in diagnosing certain
problems. Service processor checkpoints are listed in “Service Processor Checkpoints”
on page 82.
If you replace FRUs or perform an action, and the problem is still unresolved, go to
“MAP 1540: Minimum Configuration” on page 59 unless otherwise indicated in the
tables.
If you replace FRUs or perform an action, and the problem is corrected, go to
″
MAP
0410: Repair Checkout
″
in the
RS/6000
Eserver
pSeries Diagnostic Information for
Multiple Bus Systems.
Table 2. Firmware Checkpoints.
Checkpoint
Description
Action/ Possible Failing FRU
E100
Reserved/Unused
See “Unresolved Checkpoint Problems”
on page 81.
E101
Video enabled, extended memory test
See “Unresolved Checkpoint Problems”
on page 81.
E102
Firmware restart
See “Unresolved Checkpoint Problems”
on page 81.
E103
Set memory refresh (composite image)
See “Unresolved Checkpoint Problems”
on page 81.
E104
Set memory refresh (recovery block)
See “Unresolved Checkpoint Problems”
on page 81.
E105
Transfer control to operating system
(normal boot).
See “Boot Problems/Concerns” on
page 106.
E108
Run recovery block base memory (test
2K), set stack
See “Unresolved Checkpoint Problems”
on page 81.
E109
Copy CRC verification code to RAM
See “Unresolved Checkpoint Problems”
on page 81.
E10A
Turn on cache
See “Unresolved Checkpoint Problems”
on page 81.
E10B
Flush cache
See “Unresolved Checkpoint Problems”
on page 81.
E10C
Jump to CRC verification code in RAM
See “Unresolved Checkpoint Problems”
on page 81.
E10D
Compute composite image CRC
See “Unresolved Checkpoint Problems”
on page 81.
E10E
Jump back to ROM
See “Unresolved Checkpoint Problems”
on page 81.
E10F
Transfer control to open firmware
See “Unresolved Checkpoint Problems”
on page 81.
E110
Turn off cache, check if composite
image CRC is valid
See “Unresolved Checkpoint Problems”
on page 81.
88
Service Guide
Summary of Contents for 265
