IBM 265, Service Manual

Page: 213 / 365

Serial Port Speed Setup Menu
This menu allows you to set serial port speed to enhance terminal performance or to
accommodate modem capabilities.
Serial Port Speed Setup Menu
1. Serial port 1 speed:
Currently 9600
2. Serial port 2 speed:
Currently 9600
98. Return to Previous Menu
A speed of 9600 baud or higher is recommended. Valid serial port speeds are as
follows:
50 600 4800
75 1200 7200
110 2000 9600
134 2400 19200
150 2400 57600
300 3600 115200
Telephone Number Setup Menu
Use this menu to set or change the telephone numbers for reporting a system failure.
Telephone Number Setup Menu
1. Service Center Telephone Number:
Currently Unassigned
2. Customer Administration Center Telephone Number:
Currently Unassigned
3. Digital Pager Telephone Number:
Currently Unassigned
4. Customer Voice Telephone Number:
Currently Unassigned
5. Customer System Telephone Number:
Currently Unassigned
98. Return to Previous Menu
1>
v
Service Center Telephone Number is the number of the service center computer.
The service center usually includes a computer that takes calls from systems with
call-out capability. This computer is referred to as the
catcher. The catcher expects
messages in a specific format to which the service processor conforms. Contact your
service provider for the correct service center telephone number to enter here. For
Chapter 7. Using the Service Processor
197