i-SENS i-SmartCare 10 Operator'S Manual Download Page 87

Page: 87 / 133

5. Database

i-SmartCare 10 Blood Gas Analyzer

Sample Data

Last Sample
Results

Note:



Sample – Results screen, Printouts, and Interface messages display
their results in the units selected from

Setup - Unit

1. Select

MENU > SAMPLE > Last Results

2. Press and the following functions can be performed.

•

Press

to see the previous or next results.

•

Press

button to print out the results.

•

Press

to go to the list of Sample Results.

•

Press

button to send results to LIS/HIS.

Note:



When the analyzer is running on a battery and the battery level is
below

80 %

, the print function is not available.



If the analyzer is not connected to the network,

button is not

shown.



Sent results are marked as

3. Press

to exit to the main screen.

Summary of Contents for i-SmartCare 10






































































































































Search results

Summary of Contents for i-SmartCare 10

Reviews:

Related manuals for i-SmartCare 10

Brands by name

Popular brands

i-SENS i-SmartCare 10, Operator'S Manual

Search results

Summary of Contents for i-SmartCare 10

Reviews:

Related manuals for i-SmartCare 10

Brands by name

Popular brands