i-SENS i-SmartCare 10, Operator'S Manual

Page: 70 / 133

4. Sample Analysis
Operator's Manual 69
Blood Sample
Introduce Sample 1. After selecting the blood sample type (either Syringe or Capillary),
press START and wait until sampler reaches to its aspirational
position.
Syringe mode Capillary mode
Note:

The sampler will be automatically in position according to its
selected mode.

To cancel the sample analysis, press X located on the lower right
before aspiration occurs.
2. Place the Syringe to the sampler, so that the sampler probe is fully
submerged in the sample. Then press the screen.
Note:

Make sure the sample is free of air bubbles, blood clots or any
foreign substance. Otherwise the analyzer may not properly operate.