![background image](http://html1.mh-extra.com/html/hyundai/yanmar-3tnv82a-b/yanmar-3tnv82a-b_manual_2196324023.webp)
CONTROL SYSTEM
2-4
TNV Application Manual
Fuel injection pump
Be sure to perform installation assessment as specified by Yanmar to ensure applicability of the fuel injection
pump to the intended machine.
The fuel injection pump should in particular be arranged so that the ambient temperature of the rack position
sensor amplifier and the solenoid CSD does not exceed 80°C.
Figure 2-1
Type MP fuel injection pump of the Eco-governor
Supply power to the rack position sensor via terminal AVB (E43) of the E-ECU.
The fuel injection pump requires its specific injection quantity data. When replacing the fuel injection pump,
be sure to use the attached fuel injection quantity data to update the memory in the E-ECU. Failure to do so
will result in no assurance that the engine develops the intended performance.
Updating the fuel injection quantity data in the E-ECU requires a Yanmar genuine service tool. See the
manual for the service tool for the maintenance procedure.
R
a
ck po
s
ition
s
en
s
or
a
mplifier
S
olenoid v
a
lve C
S
D
00_Electronic_Control_System.book 4 ページ 2006年5月29日 月曜日 午後2時12分
Summary of Contents for Yanmar 3TNV82A-B
